DESCRIPTION

New head design

New structure designed with a low center of gravity by the use of 20g Tungsten weighting in the sole that helps to launch the ball higher.
The thinner and larger face (5% larger than IE-05) togheter with the new head material (maraging stainless steel AM355P) provide an expanded repulsion area to increase the carry distance even with low swing speeds.

The new design of the wide sole improves turf interaction from any lie.
The tungsten weighting located on the back of the sole promotes a deeper center of gravity.

The new cavity design enjoy a gorgeous appearance and high visual impact providing a premium-feeling that meets players high espectations.

New ARMRQ X shaft designed to perfectly match IE-06

By the use of Torayca carbon fibers specifically selected for this new shaft our engenieers have been able to reduce the weight of the shaft by 1gr, maintaining the soft feel and consistency, and reducing the backspin.

The adoption of the new X layer (10 axis cross fiber) is a key element for the performance of this new shaft generation.

STRUCTURAL DRAWINGS

SPECIFICATIONS

HEAD MATERIAL			Maraging stainless steel (AM355P) with Tungsten weighting
MANUFACTURING PROCESS			Casting
SHAFT			ARMRQ X 43
NUMBER			#5	#6	#7	#8	#9	#10	#11	SW
LOFT (DEG.)			24	27	30	34	38	43	49	56
LENGTH (INCH)			38	37.5	37	36.5	36	35.5	35	35
LIE ANGLE(DEG.)			61	61.5	62	62.5	63	63	63	63.5
FACE PROGRESSION(MM)			1.75	2.25	2.75	2.75	3.25	3.75	3.75	4.25
BOUNCE ANGLE(DEG.)									7	10
LENGTH OF HOSEL(MM)			57	57	57	57	58	58	59	59
LENGTH OF HEAD(MM)			105	105	105	105	104.5	104.5	104.5	104.5
HEIGHT OF FACE(MM)			55.5	56	56	57	58	58.5	59	59.5
THICKNESS OF BLADE(MM)			5.5	5.5	5.5	5.5	5.5	5.5	5.5	5.5
WIDTH OF SOLE(MM)			29.5	29.5	29.5	29.5	29.5	30	30	30.5
HEAD WEIGTH(G)			243	249	255	261	268	275	283	283
SWING WEIGHT·GROSS WEIGHT (G)	ARMRQ X 43	R	C6/332	C6/338	C6/344	C6/353	C6/359	C6/368	C6/374	C7/376
		S	C7/335	C7/341	C7/347	C7/356	C7/362	C7/371	C7/377	C8/379

SHAFT WEIGTH(G)
SHAFT	ARMRQ X 43
DIAMETTER OF TIP R	Outside 9.30mm / Inside 5.89-6.14mm
NUMBER	#5	#6	#7	#8	#9	#10	#11, SW
R	44.5	45	44.5	48	47.5	51	50.5
S	46	46.5	46	49.5	49	52.5	52
DIAMETER OF BUTT(MM)
R	14.3	14.3	14.4	14.5	14.5	14.6	14.7
S	14.4	14.4	14.5	14.6	14.6	14.7	14.8
FRECUENCY(CPM)
R	248	255	263	271	279	288	298
LENGTH(MM)
R	954	941	929	916	903	889	876
S	256	263	271	279	287	296	306
TORQUE BY SHAFT MODEL (DEG.) – 2 STAR
R	3.82	3.75	3.68	3.55	3.48	3.35	3.27
S	3.77	3.70	3.63	3.50	3.43	3.30	3.22
TORQUE BY SHAFT MODEL (DEG.) – 3 STAR
R	3.74	3.67	3.60	3.47	3.40	3.27	3.19
S	3.69	3.62	3.55	3.42	3.35	3.22	3.14
TORQUE BY SHAFT MODEL (DEG.) – 4 STAR
R	3.50	3.43	3.36	3.23	3.16	3.03	2.95
S	3.45	3.38	3.31	3.18	3.11	2.98	2.90
TORQUE BY SHAFT MODEL (DEG.) – 5 STAR
R	3.42	3.35	3.28	3.15	3.08	2.95	2.87
S	3.37	3.30	3.23	3.10	3.03	2.90	2.82

GRIP

NAME	BERES Rubber III N36 Gold
MATERIAL	Rubber
SHAFT	ARMRQ X 43
GROSS WEIGHT (G)	36.5
SIZE	60

Honma Beres IE-06 Irons Men

DESCRIPTION

New head design

New structure designed with a low center of gravity by the use of 20g Tungsten weighting in the sole that helps to launch the ball higher.

The thinner and larger face (5% larger than IE-05) togheter with the new head material (maraging stainless steel AM355P) provide an expanded repulsion area to increase the carry distance even with low swing speeds.

The new design of the wide sole improves turf interaction from any lie.

The tungsten weighting located on the back of the sole promotes a deeper center of gravity.

The new cavity design enjoy a gorgeous appearance and high visual impact providing a premium-feeling that meets players high espectations.

New ARMRQ X shaft designed to perfectly match IE-06

By the use of Torayca carbon fibers specifically selected for this new shaft our engenieers have been able to reduce the weight of the shaft by 1gr, maintaining the soft feel and consistency, and reducing the backspin.

The adoption of the new X layer (10 axis cross fiber) is a key element for the performance of this new shaft generation.

SPECIFICATIONS

HEAD MATERIAL

Maraging stainless steel (AM355P) with Tungsten weighting

MANUFACTURING PROCESS

Casting

SHAFT

ARMRQ X 43

NUMBER

#5

#6

#7

#8

#9

#10

#11

SW

LOFT (DEG.)

24

27

30

34

38

43

49

56

LENGTH (INCH)

38

37.5

37

36.5

36

35.5

35

35

LIE ANGLE(DEG.)

61

61.5

62

62.5

63

63

63

63.5

FACE PROGRESSION(MM)

1.75

2.25

2.75

2.75

3.25

3.75

3.75

4.25

BOUNCE ANGLE(DEG.)

7

10

LENGTH OF HOSEL(MM)

57

57

57

57

58

58

59

59

LENGTH OF HEAD(MM)

105

105

105

105